COMPLETE BOOK of FRAMING An Illustrated Guide for Residential Co

Description

Complete Book of Framing, Second Edition – Updated and Expanded is a comprehensive guide to rough carpentry and framing, written by an expert with over forty years of framing experience. This book guides the reader through step-by-step framing instructions for floors, walls, roofs, door and window openings, and stairs. Hundreds of full-color illustrations and photos enable novice and professional framers to understand and master framing techniques.
This Updated and Expanded Second Edition includes the framing techniques of the 2018 International Building Code (IBC), International Residential Code (IRC), and updated OSHA rules. It also includes new coverage of today’s electric tools, wind and earthquake framing, medical and physiological factors of framing, and a revised safety chapter. Builders will find information on nailing patters, overall layout, engineered wood patterns, and green framing. In addition, the book offers readers tools and techniques for preparing for a job and managing a team. This Second Edition—Updated and Expanded:

• Includes hundreds of full-color illustrations depicting step-by-step framing techniques
• Offers guidance on today’s electric tools and structural enhancements for natural disasters
• Features a revised chapter on safety to reflect the medical and physiological factors of framing
• Meets the framing techniques of the 2018 International Building Code (IBC), International Residential Code (IRC), and Occupational Safety and Health Administration (OSHA) standards

Complete Book of Framing: An Illustrated Guide for Residential Construction, Second Edition—Updated and Expanded is an excellent resource for framers, carpenters, and contractors of all experience levels. Framer-friendly tips throughout the book show how to complete framing tasks efficiently and effectively.

CONTENTS

Chapter 1: Introduction to Framing 1

• Framing Terms 4
• Framing Lumber 6
• Framing Sheathing 7
• Engineered Wood Products 8
• Lumber and Wood Structural Panel Grade Stamps 12
• Framing Nails 13
• Framing Tools 14
• The Switch to Cordless Tools 16
• Framing Tool Truck 17
• Cutting Lumber 18
• Protecting Lumber from Decay 19
• Preservative Treated Wood 21

Chapter 2: Nailing Patterns 23

• Nail Top Plate to Studs 26
• Nail Bottom Plate to Studs 26
• Nail Double Plate to Top Plate 27
• Nail Corner 27
• Nail Walls Together or Nail Double Studs 27
• Nail Trimmer to Stud 28
• Concrete Nailing 28
• Nail Bearing and Nonbearing Walls to Floor Perpendicular to Joists 29
• Nail Bearing and Nonbearing Walls to Floor Parallel to Joists 29
• Nail Header to Stud 30
• Nail Let-in Bracing 31
• Nail End of Joist 32
• Nail Rim Joist 32
• Nail Sheathing 33
• Nail Built-up Girders and Beams 34
• Nail Joist Blocking 34
• Nail Lapping Joists 35
• Nail Drywall Backing 35
• Nail Trusses to Wall 36
• Nail Ceiling Joist, Rafters, and Ridge 36
• Nail Rafters to Wall 37
• Nail Blocks 37
• Nail Fascia and Bargeboard 38

Chapter 3: Floor Framing 39

• Step 1–Crown and Place Joists 42
• Steps 2 and 3–Nail Rim Joists in Place and Cut Joists to Length 43
• Step 4–Nail Joists in Place 44
• Step 5–Frame Openings in Joists 45
• Steps 6 and 7–Block Bearing Walls and Nail Joists to Walls 46
• Step 8–Drywall Backing 47
• Step 9–Subfloor Sheathing 48

Chapter 4: Wall Framing 49

• Step 1–Spread Headers 52
• Step 2–Spread Makeup 53
• Steps 3–7–Assemble Wall 54
• Step 8–Square Wall 55
• Step 9–Sheathe Wall 56
• Step 10–Install Nail-Flange Windows 57
• Steps 11–15–Standing and Setting Wall 58
• Step 16–Plumb and Line 59
• Framing Rake Walls 62

Chapter 5: Roof Framing 71

• Roof Framing Terms 74
• Step 1–Finding the Lengths of Common Rafters 76
• Step 2–Cut Common Rafter 85
• Step 3–Set Ridge Board 88
• Step 4–Set Common Rafters 89
• Step 5–Find Length of Hip and Valley Rafters 90
• Step 6–Cut Hip and Valley Rafters 91
• Step 7–Set Hip and Valley Rafters 93
• Step 8–Set Jack Rafters 94
• Step 9–Block Rafters and Lookouts 95
• Step 10–Set Fascia 95
• Step 11–Install Sheathing 96
• Learning Rafters by Example 97
• Ceiling Joists 108
• Step 1–Spread Trusses 110
• Step 2–Sheathe Gable Ends 111
• Step 3–Set Gable Ends 111
• Step 4–Roll Trusses 112
• Steps 5–8 113

Chapter 6: Doors, Windows, and Stairs 115

• Door Framing Terms 118
• Installation of Exterior Doors 118
• Installation of Nail-Flange Window 121
• Installation of Window Flashing 122
• Steps for Window Flashing Installation When Windows Installed Before WRB (Weather Resistant Barrier) 123
• Steps for Window Flashing Installation When Windows Installed After WRB (Weather Resistant Barrier) 124
• Installation of Sliding Glass Doors 125
• Installation of Stairs 126
• Circular Stairs 131

Chapter 7: Layout 139

• Wall Layout 142
• Joist Layout 157
• Rafter or Truss Layout 159
• Roof Layout 159

Chapter 8: Engineered Wood Products 161

• Engineered Panel Products 164
• Engineered Lumber Products 165

Chapter 9: Wind and Earthquake Framing 185

• The Strength of Good Framing 188
• Understanding Structural Loads 188
• Building Code Load Requirements 189
• Regional Considerations 190
• Framing Details 190
• Hold-Downs 197
• Positive Placement Nail Guns 202

Chapter 10: Building Code Requirements 205

• Introduction to Building Codes 208
• Framing According to Code 212
• Protection from Decay 230
• Termite Protection 238

Chapter 11: Green Framing 239

• Green Framing Feeling 242
• Advanced Framing 242
• Material Selection 244
• Structural Insulated Panels (SIPs) 245
• SIP Installation 245
• SIP Tools 251

Chapter 12: Preparing for a Job 253

• Developing a Job Start Checklist 256
• Reviewing the Plans and Making Preparations 259
• Organizing the Job Site 263

Chapter 13: Managing the Framing Start 267

• Checking Exterior Wall Dimensions 270
• Checking Reference Lines for Square 271
• Adjusting Reference Lines 272
• Checking the Building for Level 274

Chapter 14: Managing a Framing Team 279

• Managing Your Team 282
• The Role of Lead Framers 283
• Quality Control 292
• Organizing Tools and Materials 293
• Teaching Framers 296
• Framing Tips for Every Task 298
• Planning and Scheduling 306
• Recordkeeping 308
• Productivity 310

Chapter 15: Safety 317

• Personal Protective Equipment 320
• Hand Tools 321
• Ladders 323
• Fall Protection 323
• Rough Terrain Forklift Safety 325
• Housekeeping 327

Chapter 16: Healthy Framing 331

• Healthy Framing 333
• Injuries and Prevention 334
• NIOSH Lifting Equation 336
• Power Tool Weights 337
• Lumber Weight Chart 338
• Stretching 339
• Noise 340
• Glossary 343, Spanish Framing Terms 351, Index 359

384 pages / 21,5 x 27,5 cm / English